-
many libraries (like JPEG decoder, Async HTTP web server...) uses the File Class from the ESP32 default library ESP32/FS; which is declared once again in this. It makes most of them unuseable, as seen…
-
_I'm a first time user, so still learning_
**Describe the bug**
OMG sends out MQTT autodiscovery messages that Home Assistant uses to build devices and entities, one such entity is `sensor.sys_lo…
-
Would love support for the Heltec LoRa32 V2.1 boards. From what I can see at initial glance it shouldn't take much to port over. The board is an ESP32-DOWDQ6 MCU with an SX1276 SPI interface LORA chip…
-
### Category
Serial
### Hardware
T-Beam
### Firmware Version
1.3.41
### Description
When using a tbeam on a Mac, the serial module is not working
Setup:
Tbeam 1.1 with:
…
-
### Board
Lilygo Esp32-s2 t8 1.1
### Device Description
Lilygo Esp32-s2 t8 1.1 (with and without sdCard)
### Hardware Configuration
void
### Version
v2.0.2
### IDE Name
Arduino IDE
### Opera…
-
Hello everyone,
Trying to flash "20220709_espnow-g20-v1.19.1-espnow-6-g44f65965b/firmware-esp32-LILYGO_TTGO_LORA32.bin" but after flashing successfully, ESP32 continuously resets.
Error:
`Per…
-
I had a build problem for another project and used paxcounter to cross check the issue:
[https://github.com/lnlp/LMIC-node/issues/45](https://github.com/lnlp/LMIC-node/issues/45)
Currently there s…
-
A while back I posted this issue about mailboxes in Ripple commander. I have yet to figure out what is wrong. After setting up the repeater and programming it with provision. I head back to ripple com…
-
When setting the gps_format to option 1 (DD MM SS.SSSS), the on-device screen's GPS page does not properly update and will show all 0's for the position. The location is properly reported to the app …
-
Having issues setting time. Everything wants to act like it is a year behind. I have 2 LILYGO TTGO T-Beam V1.1 and one TTGO lilygo device that is managed by a raspberry pi via python. The tbeams after…