-
I could not dump the original CH552T firmware which mimics the FTDI F2232H. I am worried about changing the firmware and not being able to reconfigure the tang nano FPGA in the future. Do you have the…
-
Maintainer: @aparcar
Environment: Test Builds in GitHub
Description:
On PR #14711 two files are changed from `master`:
- `net/strongswan/Makefile`
- `net/strongswan/files/ipsec.init`
Ye…
-
**Platform: aarch64, IMX8
Edge TPU Release: 2.13
Edge TPU Device: USB stick
Model used: posenet_mobilenet_v1_075_481_641_quant_decoder_edgetpu.tflite**
Having a strange USB transfer error while …
ghost updated
2 years ago
-
-
Looks like Tang-Nano_Tetris/doc/BlockDiagram.png is from your Tang-Nano_100BASE-FX_Talker repository. Do you want to remove it?
Tang-Nano_Tetris/doc/img/BlockDiagram.png looks correct.
What program …
-
in the gbhdmi.cst file you have:
IO_LOC "gbpad_a" 16;
IO_LOC "gbpad_b" 13;
IO_LOC "gbpad_select" 17;
IO_LOC "gbpad_start" 18;
IO_LOC "gbpad_right" 19;
IO_LOC "gbpad_left" 20;
IO…
-
I have compiled openFPGAloader with pamac (I use Manjaro). When I try to flash my Tang Nano 4k, I get:
```
sudo openFPGALoader -b tangnano4k -f '/home/chandler/GoWin Educational IDE/IDE/bin/hello_…
-
I tried the *LED to believe* tutorial in [https://github.com/fusesoc/blinky](https://github.com/fusesoc/blinky) for a Sipeed Tang Nano board with a fresh install of FuseSoc, Yosys, and Apicula with P…
-
As a follow up to https://github.com/litex-hub/litex-boards/pull/280 I tried getting uartbone to work on the tang nano.
Using an external ftdi chip this works as expected.
However using the internal…
-
Is it possible to set dual-purpose pins using these tools?
RECONFIG_N and DONE pins need to be set to dual purpose to use UART to CH552 on the Tang Nano.
Configuring dual-purpose pins/pin multiple…