-
#### Issue details
Could be user error, but it looks like the DSM code might not be enabled for the DSM input on BeagleBone Blue:
https://github.com/ArduPilot/ardupilot/blob/master/libraries/AP_HA…
-
Pocket Beagle with sensor cape and WIFI on a TP-LINK 722N
Boot sequence :
0-15 seconds Uboot
15 - 60 secs gets in a WAIT STATE === Does it perform a File System repair ? = same delay with or wit…
-
I am not sure whether I am allowed to ask this question here, but any help is pretty much appreciated. I tried to change the wifi config.
`connmanctl> tether wifi disable` ...
But no effect . What …
-
While investigating #190, I realized it is very inefficient to check for board type inside `gpio_set_value()`:
https://github.com/adafruit/adafruit-beaglebone-io-python/blob/master/source/event_gpio.…
-
@mirkix Thankyou very much for your amazing work on this project.
Unfortunately currently the build instructions do not work with SBUS RC controllers, the signal is not detected by ardupilot.
I …
-
The latest releases of Mycodo has a new category, Functions, with PID Controllers placed as a type of Function.
I'd like to get some input from the community as to what type of functions you think …
-
BeagleBone_Blue_sch.pdf shows "TB6621FNG" but should be "TB6612FNG".
Don't feel bad though, you're not the only one!
https://github.com/sparkfun/Motor_Driver-Dual_TB6612FNG/issues/1
-
Try to make a new Image for the Blue for ArduPilot Flight controler using latest Debian and rt-4.14
Seems that am335x-boneblue-wl1835.dtsi is missing on 4.14.6-bone- rt-r10 branch so I had this er…
-
Hi,
I just bought a beaglebone blue, plugged it in and share my internet connection from the computer using /sbin/route add default gw 192.168.7.1 and changing the adapter settings to automatic ip…
-
It would be convenient if the "BeagleBone_Blue_ShortSpec.pdf" and the website could mention the specs of the motor drivers, i.e., 1.2A continuous, 3.2A peak, 2.5-13.5V; and/or the part number TB6612FN…