-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I can't compile my firmware with my configurations, I even tried with the basic configu…
-
[Configuration_adv.zip](https://github.com/user-attachments/files/16230140/Configuration_adv.zip)
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug D…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Probe offset wizard doesn't work and exist just after homing all axes.
I have a fix mounted …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
MPCTEMP_START is defined in dwin.h, but used in temperature.cpp when EXTENSIBLE_UI and MPC_AU…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
FT_MOTION on a CoreXY printer with A and B motors, and 4 Z-Steppers. When FT_MOTION is enable…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Minor issue, running M504 from a terminal will toggle the "Enable Runout" OFF/ON.
### B…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When selecting Release Media on an Anet A8, the menu does not update to reflect "Attach Media…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
After setting MILLISECONDS_PREHEAT_TIME to any positive value the temperature.cpp check…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When printing at a higher speed with highish linear advance (k1.57, direct drive) and h…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
After flashing Marlin to the board, and having EEPROM_INIT_NOW as well as ONE_CLICK_PRINT ena…