-
In sl/Core.hpp
what is the difference between these parameters? how are they obtained?
```
CalibrationParameters calibration_parameters; /**< Intrinsic and Extrinsic stereo parameters for recti…
-
Hi,
I'm making some effort to add a new screen to the MoveIt Setup Assistant tool for the hand-eye calibration. I would like to get some feedback and suggestions. The reason of why I'm doing this …
-
There's an error in the documentation for the CharucoBoard draw():
https://docs.opencv.org/3.4.3/d0/d3c/classcv_1_1aruco_1_1CharucoBoard.html#a5f1b7c91bd8bf8271931d6f06292f1bc
It says the followin…
-
Hello,
Could someone help me solve this problem, please!
Thank you in advance for your help.
Here is what displays to me, knowing that I used two webcam type cameras.
[
 Torbox from scratch: Starting with a Pi 3 and going down to a Raspberry Pi Model B Plus Rev 1.2 I always end up with an error when it comes to `sudo pip3 install open…
-
Hi @miguelriemoliveira, @manuelgitgomes, and @Analtino2021,
When I run these commands:
`roslaunch simplebot_gazebo simplebot.launch `
and
`roslaunch simplebot_bringup bringup.launch`
…
-
----------------------------------------------------------------------------------------------------
| Required Info | …
-
Hello, I 'd like to clearify something. In all your example you use square calibration boards. Is that possible to use rectangular ones, for example, to calibrate non-overlapping vision system?
-