zotil
commented
1 year ago First of all the process runs virtually for hours even on a Pi3. In the end there is an error message like "could not make wheels for opencv.python-headless" or similar wording.
Maybe a Raspberry Pi 1 will be a bit slow to build these libraries.
Regarding the error message, try upgrading pip before running the installs: sudo pip3 install --upgrade pip
In case you want to test another alternative, you can install opencv with apt: sudo apt install python3-opencv
airgap0
radio24
Trying to build (the most useful) Torbox from scratch: Starting with a Pi 3 and going down to a Raspberry Pi Model B Plus Rev 1.2 I always end up with an error when it comes to
sudo pip3 install opencv-python-headless. First of all the process runs virtually for hours even on a Pi3. In the end there is an error message like "could not make wheels for opencv.python-headless" or similar wording. Now that is what I did:sudo raspi-config> WiFi Country set to AT, no autologinsudo printf "nameserver 1.1.1.1\nnameserver 1.0.0.1\nnameserver 8.8.8.8\nnameserver 8.8.4.4\n" | sudo tee /etc/resolv.confeverything is entered as per your instructionEverything is fine up to
sudo pip3 install opencv-python-headlessPlease tell me, if you need further information (and where to look for it)
Regards