-
Hello Matt,
please see the problem below, when I try to execute ysf_rx.grc
Generating: "/opt/linux/gr-ysf/examples/top_block.py"
Executing: "/opt/linux/gr-ysf/examples/top_block.py"
linux; GNU C++…
-
From time to time, I see people trying to connect to me but Svxlink refuses to allow the connect:
```
*** WARNING: Ignoring incoming connection from WA6TJQ since the IP address
registered in the dire…
-
Hi Guys awesome project ! I have a little issue of the RPI img. When trying to use USB audio card you recommend (http://www.amazon.com/gp/product/B007HISGRW?ref_=zg_bs_3015427011_11), and I use the de…
-
Trying to install on my B+. I have tried to contact others that have done it but have received no help. The only reply I did receive told me to talk to this group.
I would like to use my Raspberry P…
n1pce updated
9 years ago
-
The ARS Repeaters USB EchoLink adapter has a VOX circuit that only triggers properly on stereo output. svxlink only supports mono output. On Windows EchoLink it's not a problem, because Windows copies…
ajorg updated
9 years ago
-
@AngelTomas we can continue our discussion here so others joining in the project later can get up to speed quickly. As you can see I've added you as a contributor to the project. Any help you can prov…
-
For three mornings (out of 5 so far) I have found our repeater in permanent transmit with no access possible. However I was able to access the rPI software at distance and facilitate a reboot which wa…
f5vmr updated
9 years ago
-
Qtel compiled and running under Debian 64bit (sid).
Problem: after connection to a DCSEcholink bridge, verified with links CT1JIB-L and F1ZET-L, Qtel successfully can send audio to the DCS (D-Star) n…
-
**Reported by starman316 on 2014-06-27 08:12 UTC**
I am running 13.12 svxlink for my echolink simplex node, and my long Ident Stutters towards the end of the LONG IDENT
EG MB7ILL the time is 9am
but…
-
On a new installation 'make install' fails with the message:
................
-- Setting owner of /usr/local/var/spool/svxlink/qso_recorder to svxlink.daemon...
/bin/chown: invalid user: `svxlink.dae…