-
> Other things we need to consider are:
> * ability to convert the RBV of beamline
> Also, convert energy units appropriately (soft x-ray beamlines at NSLS-II use eV, not keV). In other words, rel…
-
Document the steps to save and to restore the UB matrix so that a session can be resumed.
-
According to the [EVR Manual](www.mrf.fi/dmdocuments/EVR-MRM-007.pdf
), the CGLOCK bit is at 0x052, bit 9, not 0x0050[9] as seen on line 551 of . Maybe I'm missing something?
Thanks,
-R
https…
-
As a user on SANS2D I would like to be able to move my apertures and guides in IBEX. Accuracy of movement is very important as bringing the system to vacuum while items are in the wrong place could da…
-
Hi Bruno, Mark,
I noticed for the original EIGER that there are available API commands "ABORT" and "CANCEL" for stopping exposure series in progress, which don't seem to be supported in areaDetecto…
-
As an instrument scientist on EMU, I would like to eliminate long delays when setting a field.
EMU's danfysik has intermittent communications problems, where "about 10%" of the time it will fail to…
-
I noticed that Bluesky doesn't have the `UFXC_align_mode` and `UFXC_data_mode` as defined in Spec. The former lets you control the fast shutter in I hutch using `sb()` and `bb()`, while the latter let…
-
I tried aligning the beamline with Bluesky, and I got this really nice ta2fine scan (foemirror.theta). However, when I tried moving to the center using magic `mov foemirror.theta 3199.3` the motor…
-
Would it be possible to structure the `configure/RELEASE` files to be more in line with the `epics-modules` and `synApps` standard? What I mean by this is that most modules seem to have a `RELEASE` fi…
-
Example:
```py
In [1]: import tifffile …