-
Add the logic type `lN`, e.g. `l32` or `l9001` which represents a IEEE 1164 value, i.e. `UX01ZWLH-`. Decide whether to allow for arithmetic to occur on logic types, or if a conversion function should …
-
After gain factor calibration, impedance values don't match actual test loads. The gain factor obtained for a 220Kohm resistor (2.3e-10) also doesn't correlate with the example in the AD5933 datasheet…
-
C libraries are not always very careful about documenting their safety requirements. But unsafe rust functions are expected to document in which circumstances they are safe to use. To resolve this imp…
-
Hi,
first of all I really love blockly for Franka and am happy that it is available!
How can I change the reference frame of the franka move_relative generation to world frame as default? been s…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
I'd like to model a [magamp](https://en.wikipedia.org/wiki/Magnetic_amplifier) which requires that magnetic saturation is implemented in impedance elements. As far as I can tell, coils and transformer…
-
There's a Matlab version of this sat on the Mural board. Someone needs to convert the Matlab to Numpy and re-write the tutorials as markdown. There is a comprehensive background theory document that y…
-
https://en.wikipedia.org/wiki/IEEE_1164
Character | Value
-- | --
'U' | uninitialized
'X' | strong drive, unknown logic value
'0' | strong drive, logic zero
'1' | strong drive, logic one
'Z' …