-
Issuing sleep_ms(t) can cause ticks to be missed. The number of ms lost is min(10, t). The following script demonstrates this with timer callbacks apparently occurring early. Note that they never occu…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.0-beta.1-18-g781c577745 on 2024-05-11; sunton_esp32_2432S028 with ESP32
```
### Code/REPL
```python
import wifi
import esp…
-
Hi!
I originally noticed this issue while using WebREPL. I was running loops printing sensor values and after a while (few minutes) it got stuck. It was not just one time - it reproduced over and o…
-
### Port, board and/or hardware
ESP32-C3
### MicroPython version
v1.23.0
https://micropython.org/resources/firmware/ESP32_GENERIC_C3-20240602-v1.23.0.bin
### Reproduction
The documenta…
-
I had tested. not support, do you have any plan to support ?
-
with a pip intall --user, i try several command:
```
$ mpy-fuse /mnt/rom/ --debug
Forcefully breaking the boot.py
Forcefully breaking the boot.py
Forcefully breaking the boot.py
Forcefully break…
-
First I submit code, which has errors on class level:
```
MPY: soft reboot
MicroPython v1.15 on 2021-04-18; ESP module with ESP8266
Type "help()" for more information.
>>> class X:
... bla…
-
Hi Shaoziyang,
Many thank for putting the firmware on github.
I try the firmaware with STM32-Link Utility but the SensorTile did not work.
I extracted the SENSORTILE_board_support.zip into micr…
-
Hey, I found your github with this program, just now I'm trying to make a 3d printer based on esp 8266 and all this on Nema 17 stepper motors. I would be glad of any help, whether it's an explanation …
-
**Describe the bug**
When trying to upload a file, the upload prompt will open and it also starts uploading. The problem is, that the window won't close, and the communication with the device is also…