-
1. The computer with 5300 NIC connect to a openwifi ap, the computer can access internet.
2. It can not get csi from openwifi ap, but it can get csi from commercial wireless router.
3. When I debug…
-
I'm using ANTSDR E310, it can only open WIFI of 5G now, but I also want to use 2.4G WIFI to get CSI. Can you tell me where the switch of changing frequence of WIFI is?
-
Hello,
This is Xianjun from the openwifi project (https://github.com/open-sdr/openwifi). We have built a WiFi "chip" in FPGA , and support several types of AD936x SDR boards (Xilinx FPGA) as you c…
-
I am using two seaboard running openwifi. I am wondering if there is way to configure both of them working on 2.4GHz when they are using ad-hoc mode?
Thanks
-
1. Our image is used directly or you build your own image?
yours
3. Versions: OS, Vivado, openwifi/openwifi-hw repo branch and commit revision
OS: ubuntu 20.04
4. Board/hardware type
ANTSDR E310
…
ghost updated
2 years ago
-
AP-client mode
when use cat /pro/interrupts ,tx_itrpt didn't increased,and the number of tx_itrpt is not equal to xilinx-dma-controller.
At this time, ILA was used for loopback test, and it was f…
-
Dear Mr. Jiao,
Which set of hardware is used when you realize CSI fuzzy [https://github.com/open-sdr/openwifi/blob/master/doc/app_notes/csi_fuzzer.md](url). Can other hardware achieve the same effect…
-
I haven't seen the hardware requirements of this project, or can this project run on any hardware supported by openwifi?
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
I use the DEMO board of ADRV9361-Z7035, which has fully run the openwifi function, and my mobile phone can be connected to this board normally, and the throughput test can also reach 30Mbps. I want to…