-
I have come across very strange reception issues with the latest develop branch (actually already for quite a while, but thought its due to my hardware or setup).
I have cross checked everything (h…
-
Hope telemetry viewer app can support ExpressLRS.
Now it have full telemetry support in developed branch.
And range is so good 10mW 40km no failsafe.
https://github.com/ExpressLRS/ExpressLRS
-
On ubuntu 18.04 does not starts ExpressLRS Configurator v0.5.1.
Please fix it.
mdj36 updated
3 years ago
-
R9m pre2019 cant work with 2.3.7 Qx7 Access.
Firmware for Qx7 Access includes flex.
Firmware for pre2019 is flex.
Firmware for r9mm is flex.
R9m works fine with old qx7 accst, but not the …
-
I have a Matek 722-STD FC running BF 4.2.8 and an R9M 2018 and R9MM flashed to ELRS 1.0.0.0-RC1. For ELRS configuration I have hybrid switches and telemetry enabled. My transmitter is an older Taranis…
-
## Current Behavior
My set-up:
- Jumper T16 (latest OpenTx)
- R9M module (older pre-2019 model, latest firmware)
- Many R9 Slim+ receivers (older pre-2019 model, latest firmware)
- 4 x Matek F4…
-
This error appears now and then, apart from that its good.
http://www.airwhere.co.uk/yappu/serror.jpg
-
## Current Behavior
I have 3 EP1 receivers.
All 3 receivers were bought from one seller - a set.
All 3 receivers worked fine until version 1.0.0
Starting from version 1.0.0 RC9 - all receivers do …
-
Does the R9M work on 2.4 GHz? It can be compiled (-DRegulatory_Domain_ISM_2400) for the R9M target. I would like to use it with a Ghost rx. I already flashed the rx via st-link utillity, verfied the f…
-
## Current Behavior
Inav 2.4.0 Telemetry working from rx to inav using smartport (r9m) (rssi is ok on inav)
but no return to TX (Taranis x9d + r9 2019 flex)
## Steps to Reproduce
1. use a Kaku…