-
29_April_2023
1) The Sonoff zigbee USB stick will be be added to the main hardware running the home assistant
2) each zigbee motion detection sensor can be added to the Zigbee network
3) the Zigbee …
-
Hi everyone,
I’m looking to integrate [HASmartThermostat 2](https://github.com/ScratMan/HASmartThermostat) into Home Assistant to control my heating. I have Homematic IP thermostats providing the s…
-
Hello,
Tongou TO-Q-SY2-JZT DIN rail switch has not all features available in ZHA. This switch allows to set power, temperature and current thresholds to trigger alarms and power off the load. This …
-
### What happened?
Hi,
I have got a [Philips 9290012573A](https://www.zigbee2mqtt.io/devices/9290012573A.html#philips-9290012573a)
The current firmware version 1.19.0_r19755 with build date 2016120…
-
Hi!
I was able to flash custom firmware 4.6 OTA on my MHO-C401, but after the reconnect I only get the option for Custom 4.6 or Original_Xiaomi OTA to flash. Even when trying to choose a firmware ma…
-
### Link
https://moeshouse.com/products/smart-thermostat-for-pilot-wire-heating-radiator-support-ecowatt-electricity-monitoring?variant=49571901604155
### Database entry
{"id":35,"type":"EndD…
-
hello I use your custom room card. I noticed that the state of the humidity thermometers entity was incorrectly displaying humidity. This only happens with zigbee thermometers. Entity status is OK in …
-
Trying to add a "Wiser" Pressure Dimmer but it comes up as "Unknown Zigbee device"
-
It'd be nice if the zigbee module could be used as a router when someone has an existing zigbee network.
I can compile the firmware if I'm given the hardware config for the zigbee module (uart pins, …
-
deconz driver/adapter (for ConBee/RaspBee Zigbee Coordinator) [does not support joining/pairing via install code (or qr code)](https://github.com/dresden-elektronik/deconz-serial-protocol/issues/20), …