-
I'm a newbie here. I can work a little bit with node-red and I try to obtain messages from my ad2usb unit.
installed NR + serial and ademco palette: OK
my computer has a functionnal com3 port wo…
-
Hi yozik04
Now I trying telnet interface with Arduino Uno and W5100 shield for EVOHD connection.
Have you yourself working no wirelles project for direct ethernet connection, which I can not edit c…
-
So I've made the following strides integrating with Home Assistant,
1) I parse the data from the MQTT stream and the split them to topics for the zones, i then mark them, and give them states. I th…
-
Dear denvera,
I successfully installed the DSC node server.
Now the hard part (at least for me):
> This is a front end server written in Node.js that talks to either the dscmod kernel module or an…
-
**Zwave Details :**
- Model : FIBARO System -- Unknown: type=0203, id=1000
- Capabilities : Beaming,Routing,Listening
- Domogik device(s) :
- COMMAND_CLASS_SWITCH_BINARY -- Switch
- instanc…
-
## Feature description
Allowing Home assistant to trigger an alarm state on the paradaox alarm panel from any Device linked to home assistant, in this case a Sonoff Binary motion sensor or door s…
-
If I put an Alarm Triggerd Node with delay node red will be restarted after the delay has counted down.
Due to the restart the State ist changed to home.
A Alarm Triggered Node without delay works w…
-
Flashed two JHE42B_S boards with firmware - everything flashed successfully. But after powering up buzzer - it is beeping all the time - in fast pattern. Also it is not reacting to button press or if …
-
**Describe the problem you have/What new integration you would like**
Add a configuration option to prevent the alarm panel from being armed if there is at least one sensor showing a fault.
Th…
-
Hello All,
I have been having a few issues with the homing function. I have seen on a lot of forums about this and tried everything that I have seen.
## I'm using small NO push buttons, one on each e…