-
Hello again! I finally got my E22 working. Is there a way to set and get the frequency because I would like to set it to 868MHz
-
**Describe the problem you have/What new integration you would like**
Hi, it would be nice to have a implementation of RF 868MHz frequency for the CC1101 moduls in ESPHome working like "out of …
-
-
https://reticulum.network/index_pl.html
Is possible add reticulum to MMDVM modem? For example on free band like lora or ISM. In europe 868MHz and on world 433MHz.
srem1 updated
8 months ago
-
Hi developers.
I working modified 868Mhz orangeRX JR 1W modules and modded 868Mhz receivers.
My problem: configurator support only 433Mhz (fw upgrade). Please compile and upload all versions and/or
p…
-
Since several releases there is a too large firmware shipped. ( Iooked into the last 5 releases)
```
E.G: I see:
-rw-r--r-- 1 aj aj 73K Mär 30 2017 CUL_V3_433MHZ.hex
-rw-r--r-- 1 aj aj 80K Mä…
-
The Climarad MaxiBox can be communicated with using a 4 button remote over 868Mhz. Do you recon this dongle would work with that?
The MaxiBox: https://www.climarad.nl/producten/climarad-maxibox.
-
Why have I been sent a LoRa module of 434MHz by default when I live in the UK, an 868MHz LoRa region? There was no opportunity to select an alternate LoRa module frequency! Left to consider the shippi…
-
Hello
I am quite new in Arduino and LoraWan, the Lmic library support only 915Mhz and 868Mhz, what about 433Mhz?
Thanks
eli
ELIVB updated
2 years ago
-
If I set my td receiver on 100mw and telemetry on 25mw is my understanding correct that vfr and rssi are also on 25mw?
To answer my own question yes it is the telemetry signal not the rx signal.Als…