-
I am stumped and hoping for advice.
I built an extended ATU-100 kit. Placed a dummy load on the ATU output and applied a QRP transmitter to the input. The dummy load was tested with a NanoVNA and has…
w0ati updated
3 years ago
-
Just looking at the bug reports here and in the OpenWRT defects repository, it is clear that for various mt76 chipsets the TX power is simply not working.
I myself am experimenting two issues with …
dmsza updated
2 weeks ago
-
We should update the driver to accept incoming RTCM streams that is directly forwarded to the ELLIPSE-N & ELLIPSE-D.
We can use the already existing message: [http://docs.ros.org/en/noetic/api/mavros…
-
Just opening this issue to tell I'm going to start research work for the "radio" component.
This is the link for the document draft: https://docs.google.com/document/d/1-TyGOSOcyV4VOqNyUDjEQLjrtssI8c…
-
### Platform
NRF52, ESP32
### Description
Similar to #3836, but for the BLE radio on devices which support it.
It would be nice if you could set the gain level of the Bluetooth antenna to stay w…
-
Currently there is no sense of order in the list. Would love to see if listed by category :+1:
-
This may or may not be related. In addition to a receive only antenna (Beverage) that I attach to
port RX2, I also attach a preamplified and multi coupled Shared Apex Loop on Ant Port 3, and my
pri…
-
Im trying to set up a slae.shCC2652R stick with open thread firmware. I chosen the correct device and the correct baudrate. The error still happening.
When I start the web ui the page only says 502…
-
Hi, I encounter the same problem as in https://github.com/facebookresearch/LAMA/issues/10.
And I found the reason why 2 examples are filtered is that the `obj_label` are `1970s` and `1990s`. And in `…
-
Hey @mitchellkrogza are you using the latest @pyfunceble for testing?
This domain below is no longer active (HTTP code 410 Gone) and should and an special rule should have been applied to #PyFunceb…