-
Standard pin names as `D10` are unknown for the Nano RP2040.
- Arduino IDE 2.3.2
- Arduino Mbed OS Nano Boards 4.1.5
- FQBN: `FQBN: arduino:mbed_nano:nanorp2040connect`
```
loading library …
-
### Is your proposal related to a problem? Please describe.
I'd like to add an **advanced** IoT project that combines various existing IoT use cases such as Humidity, Temperature sensing etc into a…
-
### Description
Welcome to 'IoT-Spot', good to see you here.
With this issue, the readers will get to know on how to record gyro sensor data using Arduino
Sub Repo : Arduino Scripts
To get…
-
### Hardware used
MKR GSM 1400 with MKR GPS attached as a shield.
### Issue description
When using the MKR GPS example sketch, GPS data immediately appears in the serial monitor.
However, when…
-
Hi!
Apparently I'm facing an issue which is more interesting and hard than my capabilities.
When using `Arduino_JSON` vers 0.2.0 and `Arduino_LSM6DS3` 1.0.2 I find an interesting issue in dealing …
-
I had Arduino Create agent 1.1 running on my iMac.
It worked great with my Arduino Uno.
Just bought a UNO WIFI R2 board and connected it (USB) to my computer. The board lights up and it's cyclin…
-
In the setup function in `sketch.ino.cpp` we find the following code:
```
pinMode(5, INPUT);
if (digitalRead(5) == LOW)
{
setupBluetooth();
}
else
{
setupWiFi();
}
```
I don…
-
We tried multiple MKR1010 boards with multiple different WifiNiNA FW revisions but could not establish a stable connection via wifi (or at the wast majority of the cases even connect). We have a grid …
-
Hi I cannot seen to get the simple example to compile I get the following error
use of deleted function 'TMC2208Stepper::TMC2208Stepper(uint16_t, uint16_t, float)'
0; i--) {
digitalWrite(…
-
Hello,
I am trying to connect DFPlayer to Arduino Nano 33 IoT.
I believe I cannot use SoftwareSerial there, but can use HardwareSerial Serial1, connection TX-RX and RX-TX. I also use external power …