-
Does Is there any planning for compatibility with Teensy?
-
I have a FC Skystars F405 HD2 connected with a ESP32 (Arduino) by a serial link (100kbauds, parity even, 2 stop bits, inverted).
25 bytes are sent, starting with byte 0x0F and ending with byte 0x00.
…
-
I see in the 'expansion.md' file that SBUS is read on the CVBS pin.
Does it also need ground?
The document also says the signal needs '0x01 in first byte'
How do I know if my SBUS signal has the …
-
Crash with ESP32 S2 mini.
(Code is running on ESP32)
Someone have test on ESP32 S2 ?
Any idea how to solve that ?
-
Any chance to get FPort2 protocol supported ? That being bidirectional would allow to use a single board both for telemetry and ppm demux (obviously with limitations related to available pins)
-
Radio controlled models type output. using this output joystik may to be used as rc transmitter for rc models and UAV
some long range radio transmittion systems have S-bus or PPM-sum input
as exampl…
-
hello bro i connect and run all the code and diagram in proper way but there is no sbus signal receiver in inav please help i also connect bc547 transistor with 4.7k & 10k resistor please help me :)
-
Hi,
I use your library to make some sensor ( Temperature, GPS,...). if i plug only 2 sensors on the receiver with different slot everything is working perfectly.
But if i plug 3 sensors the tele…
-
Hi
Something is wrong here.
I'm trying to sync 2 engines rpm with ESP32 (v2.0.17). Futaba T32MZ and R7008SB, only receiving channels and slots.
The display in the logg comes from Serial.prin…
-
Prerequisite Issues: None
Followup Issues: TBD
Related Issues: TBD
### Summary
- By establishing a software interface between these two components, we will be able to translate radio controller input…