-
Hi,
dose the auto Calibration work for you?
When i set it up manualy it works fine.
I have the Demo Board from AS3935 and set the register up like the demo board (my layout has the same components)
-
This solves it:
INT8U io_read(RegisterID_e reg, REG_u *val)
{
# ifdef USE_I2C
return(i2c_read(as3935_addr, reg, val));
# endif
# ifdef USE_SPI
INT8U c;
/\* Enable chip select */
digitalWr…
-
Hi @all,
today I tried to implement the AS3935 Lightning Chip in my application. But I run into problems reading the Registers separately.
My first attempt was this:
`i2cConnection.Write(0x…
-
I have added code to automatically calibrate the sensor. There are a few minor changes to make the code more consistent with your style.
I am not very familiar with GitHub but can't seem start …
-
Hi there
I tried to run demo.py with Python 3.7.3 and get the following error:
Traceback (most recent call last):
File "demo.py", line 13, in
sensor = RPi_AS3935(address=0x03, bus=1)
TypeErro…
-
Add a sensor to detect lightnings
-
bonjour voici une liste avec les derniers ships intégrés.
```
case 0x00: Serial.print(F("AS3935")); break;
case 0x01: Serial.print(F("AS3935")); break;
case 0x02: Serial.print(F("AS3935")); break;…
-
Could you provide and example on how to change settings via the webpage?
-
A cool addition to this project would be to add support for these sensors which would add further to the SC's usefulness as a home sensor:
AS3935 - A really cool sensor that can sense and warn for …
-
Add under environment section for lightning strike detectors.
Example would be SparkFun Lightning Detector - AS3935
https://www.sparkfun.com/products/15441
Proposed parameters:
1. EventType:…