-
When using NanoCBOR with the waspmote-pro board (in RIOT), I get the following error:
```sh
$ BOARD=waspmote-pro make -C tests/pkg_nanocbor
make: Entering directory '/home/jdavid/sandboxes/UiO/RI…
-
A lot of registers give their bits names such as
```
#define PORTB0 0
```
That is mildly useful in such as the *absence* of that definition tells me that this bit isn't used or might be reserve…
-
* r2 version:
```asm
heads/master-0-gffd8ecd
```
* Build environment:
```asm
Final report:
- PREFIX = /usr
- HAVE_LIB_GMP = 0
- HAVE_OPENSSL = 0
- USE_CAPSTONE = 0
- HAVE_FORK = 1
- …
-
_From @JLP69 on September 24, 2015 15:31_
I'm using the Servo library, and I've finding that `detach()` method doesn't work as in the reference. I've reading some post about it. It seems that the …
-
rmann
2008-04-21 19:37:46
Enclosed is a patch to avarice-2.7 that adds a -k/--known-devices option to print a list of AVR devices known to AVaRICE:
$ src/avarice --known-devices
AVaRICE version …
-
l ported the freecut firmware to newer cake machine. It has a different PIC than the one free cut was originally written for, but the io and the rest of the electronic where pretty much the same, exce…
-
Hi. I need to read from two serial streams at 9600 and 38400 baud with my Bluetooth Bee Standalone (from SeeedStudio, I believe). NeoSWSerial seemed just the thing. However I'm getting:
#error M…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
I followed the tutorial, everything worked out as far as hardware setup and flashing.
AtmelStudio verified flash as successful, however when powering on the machine there was not LCD activity.
I se…