-
I wanted to upgrade an old board to grbl 1.1 but getting no reaction.
My XLoader settings (frontman for avrdude) are ATMega328/COM4/57600 , no reaction so I suspect the Bootloader is defective. I ca…
-
This issue is for creating awareness for https://github.com/rust-lang/rust/issues/126349
_avr-unknown-gnu-atmega328 (ran out of registers during register allocation)_
That _rust lang_ request …
-
-
Will the DIY Midi-Controller sketch work only with the Atmega328 or can I define as Atmega2560 where applicable?
dww79 updated
4 months ago
-
Some boards do not have vid and pid at board.txt. For example:
```
##############################################################
nano.name=Arduino Nano
nano.upload.tool=avrdude
nano.upload…
-
leres
2013-07-14 18:05:10.916000
The new EarthLCD arLCD uses a atmega328 which has a signature not in the 2.13 avarice.conf (0x1e9514). Attached is a patch that clones the atmega328p entry and updat…
-
```
I am trying to write the Arduino bootloader to a new Atmega328 chip and avrdude
can't identify the chip.
1. setup programmer with a breadboard like described in
http://arduino.cc/en/Tutorial/A…
-
ATmega328P
- [ ] Leer datasheet
- Use bypass capacitors (100nF) near the MCU's VCC and GND pins to reduce noise and ensure stable power delivery.
- For bootstrapping the custom Arduino …
-
I was reading the readme and wondered if there are still issues with the ATmega328?
sdrib updated
12 years ago
-
Working on a raspberry, smply installed from the github cloned repo, I can't build or upload for Leonardo and if I run
`ino list-models`
I get :
```
uno: [DEFAULT] Arduino Uno
alamode:…