-
Wed 17 Jan 2018 04:29:03 PM CET
- This patch adds support for avrxmega3 devices already supported by latest gcc8 compiler:attiny1614, attiny1616, attiny1617, attiny212, attiny214,
attiny3214, attiny3…
-
Only device I could get quickly :-)
Ouput from console:
```
Arduino pymcuprog bridge by Quentin Bolsee and Spence Konde
Version 1.1.0 - May 2021
Using serial port COM10 at 230400 baud.
Target: …
-
### Discussed in https://github.com/SpenceKonde/megaTinyCore/discussions/547
Originally posted by **francuz152** November 12, 2021
hej, when trying to program a 3227 using a uno as jtag2updi i…
-
Just for fun, I tested the avrdude.conf file Arduino IDE ships with, and it appears that it has a few errors in it. None of them are crucial when using official Arduino hardware. Wouldn't it be better…
-
The program below reliably hangs when running the clock at 1MHz. The problem does not occur if the clock is increased to 4MHz or the baud rate is lowered to 57600. I tested this on two ATtiny814 chips…
-
Hi,
there seems to be a problem using the SoftwareSerialWithHalfDuplex library and the 1614 chip. I have used the ATTinyCore and ATTiny814 with this library and it works great, but I need more mem…
-
Hi,
I'm having an issue with EEPROM. It seems that when I manually powercycle the ATtiny814 some parts of the EEPROM value changes.
I am using
a. Arduino IDE 1.8.13
b. megaTinyCore v2.1.5
c. …
-
There are dozens of different ATTiny ICs out there, we have specified the 1604 on the PCB, is that the minimum required? Are there any other SKUs that are compatible?
-
New AVR MCUs contain a list containing all interrupts, similar to the following (`attiny412.atdf`):
```
…
-
Since AVR-GCC 8, the new tiny are supported: https://gcc.gnu.org/gcc-8/changes.html
If I do a `find /usr/local/Cellar/avr-gcc -iname "*attiny817*"` I do get the following:
```
/usr/local/Cellar/av…