-
## Bug report
I was trying to do baro temperature calibration and according to the wiki ([https://ardupilot.org/copter/docs/common-baro-temp-comp.html]), I set the TCAL_ENABLED to 2 and powered dow…
-
@bhunt2 @Kekahuna @hautruong36
Here is the Alt reading from the MultiWii GUI Config. https://www.youtube.com/watch?v=iZByfU7BjaY
This is reading without any touching of the 10DOF after turning on t…
-
Hi,
could you repair Barometer knob function? After click on it, it should be set to STD (1013HPA or 29.92 inHg). Not actual pressure like pressing B on keyboard.
Thank you
Tomas K.
-
A BMP180 Barometer Support would be great!
Currently there is no driver available.
-
Hi Kris,
Thanks for making the USFS board. It works really well, I am really impressed with the quaternion precision. I am designing a custom board which doesn't require a barometer, the core desig…
mpava updated
4 years ago
-
According to [this StackOverflow post](https://stackoverflow.com/questions/2791927/how-does-getaltitude-of-android-gps-location-works), GPS has poor altitude information. Should the barometer be used …
-
When integrating my AgoControl environment with Domoticz/Dashticz I noticed that Dashticz behaves weird when working with devices that are essentially just a barometer, i.e. without a temperature comp…
-
Per the [SanCloud barometer guide](https://www.sancloud.co.uk/?page_id=610), the metholodogy to read the barometer part of the sensor (LPS331AP) is as follows:
1. Identify the device in `/sys/bus/i…
-
I love the concept behind this! Thanks so much for doing this. Unfortunately, the numbers I get are generally nonsensical using 2.1.0. Can I help debug?
The barometer is set to 30 minutes. (I assume …
-
For some reason, my Barometer Bmp280 is not working on the updated version of iNav 7.1
It was working fine on iNav 7.0 and betaflight 4.5
Here's a screenshot:
![image](https://github.com/user-…