-
I've been working on getting MachineKit working on the Beaglebone AI. Things seem to work for the most part, but key HAL components that aren't working are hal_bb_gpio and hal_pru_generic. I've made g…
-
# BeagleBone Green
There is a [BeagleBone Green](http://www.seeedstudio.com/wiki/BeagleBone_Green) now, and it would be great if Minix officially supported it. I've acquired the hardware, and I've be…
tcort updated
8 years ago
-
Hi, does this work with the BeagleBone Black board?
-
Things to do for this:
- [ ] Figure out device tree setup
- [ ] Create file API
- [ ] Get C# programs communicating from computer
- [ ] Figure out how to interface with sensors
- [ ] I2C
- [ ] SPI…
-
beaglebone black - 2 RT processors - but the main Linux processor is a single core A8. So even though the 2 RTs give plenty of help for bit banging, the app processor isn't very powerful. But is i…
-
This same repository should contain the configuration for the BeagleBone Black.
-
@urlgrey The BeagleBone instructions are quite out of date, as they recommend installing Ubuntu 12.04. Probably we should switch it to Debian Jessie or just drop support for the BeagleBone. I don't ha…
-
-
I have an analog signal of (0-5V). I want to use the ADC of BeagleBone Black to process it, but the ADC inputs can take a maximum of 1.8V. If I down-scale the signal to (0-1.8V), then -
How should …
-
https://lore.kernel.org/linux-arm-kernel/20230727130908.10656-1-eblanc@baylibre.com/
Once merged, look to add PMIC support so that poweroff, reboot etc properly work. maybe cpufreq can control vdd_…