-
I have built a kernel from your tree using build_mainline.sh and am trying to boot it using the ubuntu-14.04.1-console-armhf-2015-01-06 system image as recommended on http://www.elinux.org/BeagleBoard…
ndyer updated
5 years ago
-
Please set CONFIG_AK8975=m
Tested with:
* https://gist.github.com/jadonk/99288dd94fb16b6c764c7c81c7735dd0
* https://gist.github.com/jadonk/bcc5f1e65f39406800c3c32cb81290b1
```
debian@beaglebo…
-
I would like to dedicate this issue to tracking progress, ideas and problems with porting (and running) LinuxCNC@master atop the Machinekit-HAL@master. This discussion was already partially broached i…
cerna updated
2 years ago
-
We have used the RTL8723BU on our board and have had some complaints about the transmit power of the module.
The driver is built as is from the lwfinger/rtl8723bu repository and all seems OK when in …
-
BB-SPIDEV0-00A0.dtbo conflict
```plain
pinctrl-single 44e10800.pinmux: pin PIN84 already requested by 48024000.serial; cannot claim for 48030000.spi
pinctrl-single 44e10800.pinmux: pin-84 (480300…
-
At this point, I think we have a reasonably stable platform with good support and plans for a stable release. Along with that milestone, I think we should start considering what we can do to make ev3d…
-
**Describe the bug and Steps to reproduce**:
https://github.com/FalconChristmas/fpp/blob/b3027120c9de061a5791c5ba4a8a2babb46558ac/src/non-gpl/CapeUtils/CapeUtils.cpp#L846-L851
This code snippet s…
-
I am having issues with the communicating to an Arduino DUE unit. In particular, with bash scripts echoing characters to the /dev/ttyACM0 dev node. These scripts work fine on my x86_64 laptop, so the …
-
Hello, I'm at the section "Testing with the BeagleBone Black" on page 156 and my BeagleBone can't seem to connect to the NFS server. I'm sure that the server itself is working since I ran the previous…
qsvui updated
10 months ago
-
The question has come up as to whether we should abandon V8 due to the many issues of dealing with V8 being a project dependency:
* difficult to build
* huge build dependency (3-5gb on Linux, 2gb …