-
Brought up by @Williangalvani as part of feedback for bluerobotics/ardusub-zola#100
-
[A user reported](https://discuss.bluerobotics.com/t/cockpit-1-0-0-release/17744/18?u=rafael.lehmkuhl) (with a video) that the joystick connects, is recognized by the configuration menu, the SVG is wo…
-
The RAJA unit test 'test-reducer-reset-seq.exe' fails reliably when the code is built with gcc and nvcc (note: only sequential version). The same test passes with other host compilers. Any thoughts o…
-
Check: https://github.com/bluerobotics/BlueOS/issues/2327, https://github.com/bluerobotics/BlueOS/issues/2323, https://github.com/bluerobotics/BlueOS/issues/2326, https://github.com/bluerobotics/BlueO…
-
- [x] Fill out [the development process section](https://github.com/bluerobotics/ardusub-zola/blob/BlueOS-1.1/extensions/index.md#development-process)
- [ ] Refine and properly integrate [development…
-
There's the possibility of losing the internet after the internet step, so we probably should go back to that step if the connection fails.
_Originally posted by @joaoantoniocardoso i…
-
### Bug description
The install script will fail if `/etc/resolve.conf.host` already exists. https://github.com/bluerobotics/BlueOS/blob/012a29e20e656a0f7e7a3e24b0b8748cb5f7602e/install/install.sh#L2…
-
### Bug description
*Note: For testing purposes my hardware consists of a Pi4 8M and Navigator, with no other ROV hardware (motors, sensors, camera, tether) attached. "Works" below means basica…
-
### Current behaviour
Current behaviour is binary - just connected or disconnected, which means operators don't have a good sense of when the connection is poor / at risk of being lost until it's too…
-
I've brought this up previously, but just formalising some thoughts on the matter here:
Now that the BlueOS Extensions system is in place it makes sense to pull the Ping Sonar Devices integration f…