-
First of all, thank you so much for making and sharing this project that enables people to perform PD analysis without super expensive equipment!
One of the issue I met during my tests is when I'm …
-
I saw a tutorial on youtube on how to fix a mavic air battery using your (excellent) tools. A commenter said that it worked on his spark batteries. So i bought a raspberry pi and set everything up bu…
-
@Botox
First of all, thank you very much for what you have done for the M365 Community! Its really outstanding! M365 is ok, with your custom Firmware it is good (was awsome before:-)), with Battery…
-
Because the V1 works but for small currents only and the V2 failed, I'm considering a new approach:
1. Use 4S 18650 to achieve 12.8 - 16.8 V which could then be connected to a much more efficient b…
-
Hi,
have not seen anything that describes this but when you connect your charge cable to your car the ev-robot will start to charge instantly, will ev smart charging stop this after x amount of time?…
-
By luck I found the description how to use EVCC to control my heat pump (in addition to my wallbox). I would like to share the following improvement ideas:
1. The heat pump use case is not well "ad…
-
This has been on my mind for a while, but I've never written it down: the matching needs to be updated.
This was some of the first Python I ever wrote, so that's not ideal. But a key issue is takin…
-
Hi Edwin
thank you for your very good app which is working perfekt. I habe bought the new solar Edge EV charger.
It would be fantastic if you could also integrate this new item into the app in order…
-
As we are more and more forced to use our own solar energy as much as possible it would be very handy to have the actual solar-value available for smart automation. With the current P1-delivery value …
-
When livepatching Linux 6.10, I get the warning below from the kernel. This seems to be harmless.
My kernel config: [kernel-config.txt](https://github.com/user-attachments/files/16360923/kernel-con…
blitz updated
3 weeks ago