-
### Is your feature request related to a problem? Please describe.
We are running a 3D printer with a Duet 2 WiFi board. Our wireless network environment requires to use Protected management frames (…
-
2.3.55
_Version of SupserSlicer used goes here, Use `About->About SuperSlicer`_
Windows 10 Home. Build 19042.746
_What OS are you using (and version)_
Delta, Duet Wifi, Firmware: RepRapFirmwar…
-
Hi,
first of all big thanks for making this available.
I previously used Octopi and timelabs was always on my wish list since I moved fully to Duet.
My setup runs a duetwifi on release 3 firmwa…
-
### Version
Version: 2.3.55.2
Build: SuperSlicer_2.3.55.2
### Operating system type + version
Operating System: Windows
System Architecture: 64 bit
Windows Version: Windows 10 (build 18363), 6…
-
Hello Christian, I left you a message a week ago in the RepRap forum private box about an help system for DWC that I am developing, but this message is still unread after one week, could you please ha…
-
The sketch you've uploaded is old and outdated. It will only work for RRF2. RRF3 has been released for over 18 months and we should be pushing users to use the latest version of software, not somethin…
-
## notes on homestar running 5.19.1:
here is list of working and non working features on the lenovo duet 5 chromebook.
please also have a look at https://github.com/hexdump0815/imagebuilder/issues…
-
Rerap 2 and 3 firmware configuration data missing.
-
### What happened?
This may be a "working as intended"
But Basically you can see that at 100% scale, the bottom layer does not have any infill.
Scaling to 200% allows SS to generate infill.
No…
-
I was wondering if any plans to enable this to monitor prints directly from a printer running RepRap Firmware (I.e. on a Duet) without having to have a Pi running Octoprint acting as a middle man?
…