-
Originally posted by @JohnConnett in https://github.com/kardia-as/zigpy-zboss/discussions/43 under discussions section https://github.com/kardia-as/zigpy-zboss/discussions
> _**I have an nRF5340 DK…
Hedda updated
2 weeks ago
-
``Hello Kris, thanks for the ebyte library provided and the video intro provided at https://www.youtube.com/watch?v=hMjArKGucFA
So I decided to modify the library, specifically, increasing the tran…
-
Have you considered replacing CC2530 in DIYRuZ Flower sensor design with a new TI CC26xx MCU like the CC2652 series or similar?
Should in theory make the battery last much longer and get better sig…
Hedda updated
2 years ago
-
Error if send from bluetooth: failed, code -705
Receive not work (len off)
My config
```
#ifdef ESP32_DIY_1W_LoRa_GPS // My Ebyte E22 400M30S OR RA-01S / SX1268
#define OLED_SDA …
-
Any plans to add support for nRF52810-based boards?
For example, http://www.ebyte.com/en/product-view-news.aspx?id=587
-
cool project & super webinstaller
i successful tested ahoyDTU with ESP32 and EBYTE E01-ML01DP5 2,4 GHz Wireless Modul with this solderless case ==> https://www.thingiverse.com/thing:5632374
## Ha…
-
We have 10 modules, and when they work, they are working great. We have 2 modules sending data every second to a receiver.
However, all of the sudden and out of the blue, the modules just stop work…
-
## Hardware
ESP32
### nRF24L01+ Module
nRF24L01+ verified **Plus model** from eByte
### Antenna:
external antenna (SMA)
### Power Stabilization:
100uF Electrolytic Capacitor
### Buil…
kiu77 updated
5 months ago
-
Can u provide c++ library for this e22 module not Arduino.
-
I use a E282G4M27S from Ebyte (without TCXO ... it's a pitty) and the output power is always the same (22dBm) regardless the output power selection.
73
F5MDY updated
2 years ago