-
On the 'May' monthly view, the attached event shows correctly.
Note that is is also displayed on June 5.
Advance to month 'June' and the event is no longer shown. Not even on the 5th.
(Same for lat…
-
Hello beautiful people.
I work for a big ECAD software house, writing articles.
I would like to make a couple of articles improving the bus pirate V4 hardware.
Which features / improvements / b…
-
I'm not sure where I'm supposed to find your comments, but I didn't see anything on Sakai or Github. Thanks for the help!
-
We now have software, documentation, schematics etc in this repo.
Do we want to restructure the repo a bit to make it easier to find stuff?
A first good step might be to put all of the software piec…
-
Some tests are not running because there are GRASS GIS data used which are not included in the test docker. The `ECAD` location have to be changed to the `NC-modis_lst` mapset in the tests.
Additiona…
-
我得说现在的www.datasheet5.com实在是太强大了，查了近20多个器件，只有一个器件没有eCad库，其它器件全部都有各种pcb设计工具的原理图符号、封装和3D模型！硬件工程师的设计从未如此简单、可靠！
-
- Climate Index data can be downloaded at https://www.ecad.eu/download/millennium/millennium.php (zip files)
- Add climate index data as database in Galaxy?
-
IMHO not urgent. Revision 2 or later.
Clearly mark the UKMaRSBot PCB so show that it is Open Hardware. Hence the PCB CAD is impacted. I have seen projects where the logo is added to the schematic t…
-
Currently, the modules inside the `utils` module are scoped by function, e.g. "bom_generation" and "netlist_generation". This was fine when all the utils were for Altium projects, but with the upcomin…
-
```
> dir.create("/tmp/defmm")
> unzip_spd_demo("mcmicro.io", dest="/tmp/defmm") -> mm
returning path to cached zip
> mcm = readSpatialData(mm)
> mcm
class: SpatialData
- images(1):
- exempl…