-
本人的配置:i7 6650U HD540 8+256G
由于之前的minstolensize补丁已经失效了,所以采用了另外一个方法来驱动显卡,目前来说是和minstolensize补丁一样的效果,能够成功驱动显卡
如果是第一次安装BigSur的话,就先用config_install里面的config文件安装,等到能够正常进入系统之后再换用原来的config,不然在安装界面会卡死。
不能用的功…
-
can you write a bios setup before install?
-
After updating to BigSur months ago my computer become very slow and all the 16gb of RAM are often full without practically doing anything...
Any idea why of these low performances?
I'm on EFI 1.6…
-
大佬你好,我是 i7-7700hq 版本的 R720 ,用了你的 EFI 装上了 BigSur,能正常使用,但是 无法用 HDMI 转接 VGA 连接显示器(显示器只有 VGA 接口),有教程能解决这一块吗。
-
Hi,
I successfully installed MacOS on my Thinkpad in the past and it is running perfectly on MacOS BigSur (11.1). I would like to update my System to a newer MacOS Version, so I ported over my SMBIOS…
-
After booting in selection mode "Press Alt till boots"
1) If I press "EFI Boot icon" Mac boots in that mode. (whaaaa)
2) if I press "Install BigSur icon" it shows me O with line trough it. (nooooo…
-
蓝牙不可用(设置无图标)-放在le也不行-只能换网卡吗?而且无线网也是不可用(这一款英特尔貌似无解?),排除这两项全是接近完美了吧
HT-ZH updated
2 years ago
-
this EFI 4.0
thanks.
-
电脑型号:戴尔7472
BIOS:1.3.1
系统:黑果小兵11.2.1
用黑果小兵的映像刻录好U盘后,用您的efi文件进行替换映像的原有efi,然后再代码界面卡住,卡住界面代码如下面这些
例子1:HID:Legacy shim 2
例子2:Generation from SMC report as 2
例子3:Initializing
例子4:AGDCBacklightContro…
-
I created a Sonoma(14.5) USB installation disk with Etcher, and copied the EFI files as instructed on a win11 PC。
When plugged to my Surface pro 4 (i5/8G/256G), the USB disk can boot the system prope…