-
### TLDR
The EFM8SB20F32G can lock up on older firmware versions.
This results in the tCam being unable to boot, and the red LED being lit.
### Immediate fix
Disconnecting and reconnecting batt…
-
[Log.txt](https://github.com/jflight-public/jesc-configurator/files/4080121/Log.txt)
I hope this shows you what you are looking for.... I was one of those guys that didnt read all of the documents …
-
Hi,
Alongside @ksigurdsson I've been using pyOCD to test an M3 in a custom ASIC, via a SEGGER JLink debugger.
During this we've noticed that loading and dumping regions of memory is very slow (loa…
-
The KaKu range of switches uses a different RF433 protocol from the RemoteSwitch library.
There is a library to support this at https://bitbucket.org/fuzzillogic/433mhzforarduino/wiki/Home
**…
-
Hi!
I have a remote (Tevion GT-8000, using a HOLTEK HT48R01T3 chip) which is somehow received, but I'm not able to sniff anything…
- I enable bucket sniffing (rfraw 177), command is acknowledged…
-
### Information
Digoo DG-R8H Outdoor Humidity Sensor
### Sniffed data
21:01:26 MQT: HA/RF_Bridge/RESULT = {"RfRaw":{"Data":"AA B1 03 0226 073A 0726 28180808 55"}}
21:01:26 MQT: HA/RF_Bridge/RESU…
-
Hello, i'm trying to flash Bluejay on my FVT Littlebee 30A ( F395 processor ), but the configurator does not recognize them
![ESC1](https://github.com/stylesuxx/esc-configurator/assets/10097521/b5e…
-
**Is your feature request related to a problem? Please describe.**
Installed the ActronQue plugin and configured to connect to my ActronAir NEO Controller. Error logs show errors with API Validation …
-
### Device
Sonoff RF Bridge R2 v2
### Version
espurna-1.14.1-itead-sonoff-rfbridge
### Question
Hi everyone
I installed espruna on sonoff rf bridge R2 v2.
When I try to send a signal it sends i…
-
**Have you looked for this feature in other issues and in the docs?**
Yes
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the…