-
Can you guys add a filament sensor. I am thinking the main idea would be that the filament would run over a [Micro Switch ](https://www.adafruit.com/products/819) and close the circuit when there is …
-
I have just installed Prusa Link on my original MK3 printer and the filament sensor will not work after the required firmware update. Just to be clear, I have the original i2c connected sensor and no…
-
Hello :)
Big thanks for your job. I'm using your mod and its really great. Are You planning to implement filament sensor like e.g in this project https://github.com/EtteGit/EnragedRabbitProject/blob/…
jaqo updated
8 months ago
-
### Printer model
mk3.5 mmu3
### Firmware version
6.0.4
### Upgrades and modifications
_No response_
### Printing from...
prusa connect
### Describe the bug
When printing from prusa connect (…
-
Hey Michael,
I want to use your fork but I don't want to lose the filament sensor. I'll be using a Pallet 2 to fuse filaments together and I think I'd like it. Figuring out how to do pause and resume…
-
Hola, he estado trabajando hace unos días en este firmware, actualmente estoy probando la función de pérdida de energía, pero estoy aquí para preguntarles si alguien ha intentado agregar el sensor fil…
-
Hi moggieuk.
OK, so I think I have tracked down the delta reported between unload / load distances for Tradrack with Encoder, Gate end stop and toolhead sensor. On load, HH doesn't appear to acco…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I installed two BTT SFS 2.0 on my IDEX printer, these are smart filament sensors with e…
-
### Printer model
MK4, XL
### Describe the feature
Basically, users could chose to replace the preheat button with, for example, "set ready". Alternatively, users could add two new buttons to…
-
Hi, first of all thanks for the work you have done!
Secondly I would like to ask, if you are planning on releasing new version compatible with Prusa's ball bearing filament sensor... for the hemera…