-
So I got a new Lattice CrossLink-NX EVN. Used this tool to fix the default configuration of FT2232H for openFPGALoader.
While I am not sure if the repo can be renamed (can it?), I believe the READ…
-
Hello, i have trouble with programming falsh, because writing bin file is soo long.
real time delay is reading and verify procedure
```
Reading old flash chip contents - ~2m12s
Erasing an…
-
Hi, I am currently working on a Senior project where we have designed a custom jtag architecture based on the IEEE 1149.1 standard. We are attempting to test our design synthesized on an FPGA using a …
-
I opened [an issue on blinka](https://github.com/adafruit/Adafruit_Blinka/issues/479) that appears to be due at least in part to pyftdi.
See the steps in the other issue but to summarize:
- on an …
-
I don't know if the correct place. I'd to buy an ESP32 for test this sniffer, but I have some doubts.
If I buy a ESP32-DOIT or ESP32-DevKitC I can't test the feature "TX Interception" when it will be…
-
I've been having issue after issue of trying to get my BPv4 to properly flash dump.
v7.1 firmware: Hangs on ```Initializing buspirate_spi programmer```
6.2-r1981 / v7.0 / v6.3-r2151: Chip either…
-
```
What steps will reproduce the problem?
1. Linux Ubuntu (32-bit) 14.04LTS on VMware Win7 x64 host.
2. Single FT2232H Mini Module
3. Init the channel as,
channelConf.ClockRate = 1000000; // …
-
First of all, great library and thanks for sharing!
I use a FT2232H to communicate over I2C to a custom microcontroller. As some of the requests are a bit intensive for this controller, it will str…
-
```
FastTransfer is called with pointer to a non empty output buffer, and an input
buffer, transfer size : 2 bytes.
Expecting a 2-byte SPI transaction, but only the start and stop condition (CS
goi…
-
```
FastTransfer is called with pointer to a non empty output buffer, and an input
buffer, transfer size : 2 bytes.
Expecting a 2-byte SPI transaction, but only the start and stop condition (CS
goi…