-
Vearch 版本 v3.4.2
使用如下镜像 docker 部署:
![image](https://github.com/vearch/vearch/assets/89443035/3e4c99ae-d07a-42f6-a907-eb6f6525bb46)
master * 1
router * 1
ps * 2
配置文件如下:
```
[global]
name = …
-
In [this reply](https://mastodon.social/@dploeger/112563888619602124) to a Bluesky user, the GIF wasn't available on Bluesky. Only the user handle was visible.
Sending a normal picture in a reply wor…
-
Died in Thousand Needles, in the Shimmering Flats near the road to Tanaris; got ported to the spirit healer near the great lift, instead of the one closer to shimmering flats
![image](https://user-im…
-
Hello, this might have a very obvious question, but I've plotted my magnetometer values on a 3D scatter graph, the next step in the wiki is the use the code you state, which is this:
void magcalMPU9…
-
So I'm using GY-521 MPU-6050 for my Jetson Nano, So I tried to run this code example https://github.com/adafruit/Adafruit_CircuitPython_MPU6050/blob/main/examples/mpu6050_simpletest.py then there is a…
-
Hello, im traying to use a code did with arduino to control servomotors using the MPU6050 drive at MSP430 using the IDE Energia, that is similar to the IDE Arduino. It works fine with ARDUINO but when…
-
Hi,
I brought a MPU9250 - https://www.addicore.com/mpu-9250-p/ad280.htm and use your library with arduino mega 2560. I upload https://github.com/kriswiner/MPU9250/blob/master/MPU9250BasicAHRS.ino ar…
-
Hello,
I have an MPU-9250 and use your sample "MPU9250BasicAHRS" from the Sparkfun library. In order to use the RTC DS3231, I changed the I2C address of the MPU-9250 in 0x69 by ADO -> 3.3V and
`#d…
-
I'm using WEMOS Lolin32 board and merge your MPU9250_MS5637_AHRS_t3.ino code.
calibration results as below :
MPU9250
9-DOF 16-bit
motion sensor
60 ug LSB
Scanning...
I2C device found at addre…
-
```
print('██████╗ ██╗ ██╗██████╗ ██████╗')
print('██╔══██╗██║ ██║██╔══██╗██╔════╝')
print('██████╔╝██║ ██║██████╔╝██║ ███╗')
print('██╔═══╝ ██║ ██║██╔══██╗██║ ██║')
print('██║ ╚█████…