-
### Before submitting a new issue
- [y] I [redownloaded the latest release](https://my.home-assistant.io/redirect/hacs_repository/?owner=signalkraft&repository=mypyllant-component) and restarted Ho…
-
### TFT Version
"unknown"
### Firmware Version
4.3.11
### Blueprint Version
4.3.11
### Panel Model
US
### What is the bug?
I recently updated my NSpanel, and all seems okay for the most part.…
-
If one is using a heater, it could be possible (and desirable) to use a PID control, especially in small water volumes. We should introduce a PID that can be turned on when the box is in heater mode,…
-
I'm able to connect and control JXi heater to RS8 via 485 interface as long as I connect water temp probe, or 22k ohm resistor, across RS8 water temp input. However, AqualinkD does not recognize the J…
-
HA:2024.5.5
Xiaomi Miot Auto:0.7.18
日志: custom_components.xiaomi_miot.climate
来源: custom_components/xiaomi_miot/__init__.py:1412
集成: Xiaomi Miot Auto
首次发生: 2024年5月31日 23:43:10 (38 全部发生)
上次记录: …
-
Adding this here to not forget, the H2 and O2 tank systems had control modules so that both tanks had to be at a low pressure condition to engage the fans/heaters in AUTO.
For missions with 3 H2 an…
-
I have everything wired and setup. I can access the control panel, but the button presses are not doing anything.
I am attempting to use the serial logger to get info, but it just keeps hanging:
`…
-
Hi there,
very advanced hard- and software indeed! Very impressed!
I have a Truma Contol 4 Heater and Truma A/C operating with the Truma iNet Box and intend to switch the iNet Box for a custom so…
-
**Machine ID**
SW V3.3x
**Describe the bug**
Stop PB, start 30, start 60, start 105 no response while heater on sequence is running
**To Reproduce**
Steps to reproduce the behavior:
1. Go to…
-
I'm running the latest master on the latest stable Home Assistant in a Docker container.
I have following configuration:
```yaml
- platform: smart_thermostat
unique_id: ilp_pid_thermostat
n…