-
Hi,
I do have a floating current tarif model like f.e. [Smartcontrol](https://www.smartenergy.at/smartcontrol).
This means the price changes every hour from rather cheap to expensive.
There are…
Skol6 updated
4 hours ago
-
On my Buderus WLW186 heatpump with ems-esp 3.7.0-dev.32 I have successful communication, but failures and errors of the heatpump will not be indicated at the ems-esp. I have "created" a failure by dis…
-
### The problem
In my Integration i can't control the climate system S1
### What version of Home Assistant Core has the issue?
2024.11.3
### What was the last working version of Home Assistant Cor…
-
I would like to hook up my "Remko RVT 256" via the SmartControl USB WiFi Stick to Homeassistant. I recon this HA extension is not tested for this specific device, so I would like to dig into this.
…
-
Hi,
thanks for your great work!
I have an Elco Aerotop Split without the Webmodule installed. As I get a bunch of unknown messages, I try to extend your csv.
However, my changes show no effec…
-
Since I upgraded my Nibe F1255-12 to firmware 9699R7 I get an error when trying to reset an alarm.
The error is: "Heatpump denied writing alarm-reset-45171"
-
I am using an ESP32-S3-Devkitc-1
```
esphome:
name: waermepumpe
friendly_name: "Wärmepumpe CAN Interface"
platformio_options:
build_flags:
- "-std=gnu++17"
build_unflags:…
-
### The problem
I've been toying with the dev version of HA to try to make my HomeAssistant show all of my ViCare sensors and connected stuff.
I do see the device in the diagnostics as well as the d…
-
### The problem
The sensor "VVM310 EB101-EP14 Tot. op.time compr" (sensor.eb101_ep14_tot_op_time_compr_44071) is shown as unavailable, previously it was available and correctly reported the total ope…
-
My ATAG One is been connected to a Weheat Blackbird heatpump last February. Since this connection the ATAG integration in Home Assistant still works fine with the exception of the water pressure being…