-
**Describe the problem you have/What new integration you would like**
The Panasonic H & J Series Aquarea air-water heat pump had same sensors and settings. This settings and sensors are visible…
-
Hi,
today I tried GoHeishaMon on a raspberry, so far it worked without a problem connected to CN-NMODE *thumbsup*.
By know I am using Heishamon via esp8266 as my primary data source which is conn…
-
A new YAML file for Home Assistant has just been released. It is worth preparing a version for the K/L series pumps. These pumps report information about consumed and generated energy differently.
…
-
Hi,
currently COP is an added calculated sensor and it works exactly as on the heat pump. It should be noted however, that there is a small flaw: during defrost COP is shown as a VERY high number and…
-
** Versions **
- Home Assistant version: 2024.10.3
- This integration version (for instance 1.1.0): 1.4.1
Hi,
I have added a second heatpump by changing the second topic prefix to panason…
-
Description of February 2022:
"...Minimal heat pump control available and **will be extended in near future.**..."
New control features would be awesome for users without home automation.
@Eg…
-
As the title states, these could be useful to rely less on e.g. Node-Red for some controls.
Background: I have a buffer. Now when emulating the optional PCB to deliver Buffer Temp, Room Temperature…
-
Hi there. I have a Panasonic CS/CU-Z35 that I would love to get out of the cloud. Has any further progress been made with the CTAG interface decoding? Would the Heishamon work be applicable to this in…
-
Hi all
Is the CN-CNT connection using RS232 or RS485 as communikation protocol.
I believe it is the RS232, but could you please confirm and show some documentation.
Thanks in advance.
-
Since I connected a Heishamon V5 with new firmware V 3.5 to my Panasonic model K All-in-One there is a (new) value in TOP115. That value is plausible and in Bar.
As far as I know there is no meter…