-
ID5100 keeps trying 0x25....
rigctld.c(639) Startup: C:/Users/leeot/OneDrive/Documents/CodeProjects/hamlib-4.6~git-20231116/tests/.libs/rigctld.exe -m 3071 -r COM6 -s 9600 -c 0x8C -T 127.0.0.1 -t 453…
-
e.g. IC-9700 has a network port for CAT control
Protocol is not CI-V and need manual for the network protocol.
-
The iCOM IC-9700 amd IC-7300 are very popular and very similar multi-mode Amateur Radio Transceiver. Most iCOM models use the same protocol according to the individual model's supported features, It …
G8YTZ updated
2 years ago
-
In both the pymedphys iCOM listener tool, and other commercial iCOM listener tools I have been able to have access to I have found that the listener itself can cause Mosaiq to stop recording a treatme…
-
### Describe the bug
The Alignment of Chevron-left and Chevron-right icon is wrong on the video below "Join Discord Server" Button , to the Left of Subscribers count
### To Reproduce
1. Go to Home …
-
When operating split on an Icom radio, if the difference between the RX and TX frequency is greater than the AUTOSPENABLE value, S&P mode is automatically set. This happens on an Icom radio. This may …
-
The ICOM IC-735 has no 5 byte frequency information, but only in 4 bytes. The controller takes the fitfh byte (fd='end of transmission') as 5ths byte for frequency information and switches to manual m…
-
I am trying to connect with the examples you are providing. With and without hyphen. Nothing works.
I have a MB Lan 2 (hardware version: iCom_Low_v1 and firmware 01.10.03).
Should I connect with IVT…
-
Implement PARM_BAND_SELECT for Icom and Kenwood rigs
0x1a 0x01 for Icom rigs (7300).
-
It seems the RF side call signs seem to be missing in for the `Repeater header` at least when connected to icom repeater gear.
```
2024-09-07 23:25:22: Repeater header - My: / Your: …