-
This issue lists the status of all tests for the [Release Candidate 1 of the 2024.07](https://github.com/RIOT-OS/RIOT/releases/tag/2024.07-RC1) release.
Specs tested:
- [x] [01-ci](https://github.…
-
## Description
https://github.com/rosmo-robot/smartcar_shield/tree/master/src/sensors/heading
Add LIS3DH support to the lib
## Definition of Done
Sensor data from LIS3DH is available
-
### Describe the bug
after flashing bf 4.4.0 rc3 when on configuration page gyro is not detected.
### To Reproduce
flash bf to crazybeef4fr with BMI270 gyro, apply custom defaults, connect, go to c…
-
### Describe the bug
Betaflight 4.4 RC3 - choosing SPI RX, save and reboot causes loss of comm port
Superbee F4 lite frsky v1.0 fc works fine on 4.4 rc1 and rc2. Using 10.9.0-rc3 configurator on …
-
### Describe the bug
on receiver tab cannot set receiver mode to SPI Rx
### To Reproduce
flash FC with bf 4.4.0 RC3, apply custom defaults, go to receiver tab, select SPI RX, save and reboot. Go ba…
-
### CircuitPython version
```python
1. Adafruit CircuitPython 7.3.0-beta.1 on 2022-04-07; Adafruit QT Py RP2040 with rp2040
2. Adafruit CircuitPython 7.3.0-beta.0 on 2022-04-01; ESP32-S3-DevKitC-1-N…
-
See #2344 for a description of the error.
This is a tracker list of global variables without clear scoping (either `static` or `extern`)
The following files have global variables defined which m…
-
Hi, I am trying to use RTIMULib2 on a Raspberry Pi model 3B+ running Ubuntu 20.04 with an SPI attached LSM9DS1 IMU. After compiling and installing the library, I get this output whenever I run ```RTIM…
-
I'm using an L3G4200D on a Gy-80 sensor board with an Arduino Due.
The raw values obtained when running the L3G4200D_raw.ino code range from 0 to 255, there is no difference between clockwise and cou…
ghost updated
2 years ago
-
The manufacturer no longer considers this part in production. The nodemcu module hard-codes the device's I2C address and so is not immediately usable with the suggested replacement, the l3gd20 (https…