-
Is there a way to make the laser slightly overlap the cut end and begin points?
Should only have to be the width of the laser beam.
So as an example:
Current: Cutting a 2" circle, the laser would tr…
-
Hi, looooo.
I wanted to design a sprocket for a bicycle chain.
It was really complicated to enter right data. Finally I gave up and bought the chain first, to be able to test generated sprocket…
-
https://support.snapmaker.com/hc/en-us/articles/4414359020951-Parameter-Configuration-Guide-How-to-Set-Proper-Work-Parameters-for-Laser-Engraving-and-Cutting
[How to Set Proper Work Parameters for …
-
The purpose of this enhancement is to introduce additional calculations for DXF files in the context of Metal Laser Cutting. The proposed calculations include:
**Area of Polygon:**
Calculating the…
-
I don't think it would be too difficult to modify the tabbing behaviour to place a square tab (or series of them) instead of the paper tabs, and alternated tabs on the other part to make "snap togethe…
-
Hi. I have recently bought Ortur Laser master 2 and having issue with lines not matching on X and Y axis.
I have tried readjusting focus multiple times, cleaning the lens, tilting laser sideways but …
-
```
HttpException: https://www.instructables.com/workshop/laser-cutting/projects/recent/ resulted in `404 Not Found` in lib/contents.php line 194
index.php(7): RssBridge->main()
lib/RssBridge.php…
-
The next step is to learn the basic tools of FreeCAD for a 'feel' of the software, although there is a question here as to whether a small set of 'learn the basics' tutorials or launching right into '…
-
I'm using git master of svgtogcode and j-tech with a laser driven by grbl.
I've activated Dwell Time.
This adds G4 P statements into my gcode
These statements are however added _AFTER_ the la…
-
I have been using Ponoko for laser cutting, but they do not appear to have 3mm and 6mm wood thicknesses. Also, they don't take CorelDRAW files. (Seems like most places take SVG files, which would al…