-
#25 inspired me to look at using existing mounting solutions for minis. The loudest , most dreadful, least-square part of my geartrain was the fwd/reverse and 45T/20T shelf mounted pulley. That sucker…
-
for example
activeIncrementValue = 1.0000
when I turn encoder A or encoder B (if present) slowly - position incremented by 1 as it should.
If I turn encoder rapidly back an forth, position increme…
-
**Version and Build Date**
Version = 1.2.4
Not a bug. More like Mesact (_maybe)_ needs some tweaking on how a step/dir spindle config is generated.
To summarize, both PnCConf and Mesact create…
-
Hello.
First, thank you very much for all the work you do for this project!
I'm looking for a project that can be used as an electronic lead screw for the lathe with CNC capabilities, so the lathe c…
-
Extrude is currently limited to linear extrusions, as far as I can tell, and lathe, even with the helical mode in development, can only extrude around an arbitrary normal (helical mode just allows for…
-
First of all, the obligatory but very sincere THANK YOU JAMES for all of your hard work on this project and for sharing it with the world. I've learned a great deal in following your excellent detail…
-
Hey guys,
Just wanted to get this on the list for grbl mega. Not sure how this would be done but it would be nice to have the capability to do threading with a grbl controlled lathe.
If this shoul…
tklus updated
3 years ago
-
Beta 8, Beta 8.8
After COM port and parameters selected at first run, it's no any wey to see the port used or change it from the GUI.
UPD: on B 8.8 jog commands, commands from buttons in GUI shown…
-
It'd be nice to support this to allow tool changes:
* Program pauses at M0
* A notification shows comment on M0 line. e.g. "Switch to tool 7"
* User can jog, set zero, and enter manual commands
…
-
Please correct me if i'm wrong but it doesn't seem like there is any consideration between encoder position-scale and encoder-scale. From my research:
position_scale should be the machine units pe…