-
wiThrottle should support DCC decoders with 28 speed steps.
There should be a selection after the DCC address with at least the options "128", "28" speed steps.
May be this could extended to all o…
-
Hi,
I'm investigating uses for Xpressnet outside of commercial hardware from Lenz. Are you still working on implementing Xpressnet - RS485 on Arduino with the issue related to 8-bit vs. 9-bit data…
-
I can't be alone in experimenting with RailCom.
One feature RailCom allows is reading of CV values "on the main", and the value is detected by a "Channel-2" reader.
To make experiments ea…
-
This approach makes a lot of sense to me.
I think that the 100% most valuable hardware to produce first (if you want buy-in from the modeling community) is the MQTT-LCP-DCC bridge specifically for …
-
**Setup**
Server & Client
Add "LocoNet" as Interface, Set a non-Loopback IP address and Port
Click "Toggle Connection"
In the Status Column of the Interfaces window "Initializing".
(You realise y…
-
Hi, I've recently came across this interesting video of McKinley Railway layout:
[48. Loco Control with assistance of the Database at McKinley Railway.](https://www.youtube.com/watch?v=06OKzYXdj9w)
…
gfgit updated
1 month ago
-
**Describe the bug**
Clicking Power On in the UI doesn't send LocoNet TrackPower On Command to the Server
**To Reproduce**
Steps to reproduce the behavior:
1. Create LocoNet Interface, set IP an…
-
From #66 -
Let's discuss what kind layout bus we're interested in developing. We have the possibility of influencing where the industry goes in the future with this, but we also want to remain as …
-
Unable to connect to RedHat++ LocoNet LBServer
This happens on both macOS -server and debian -server
Tried with multiple ports.
Verified it's not a IoTT/RedHat++ issue as JMRI from the same …
-
Hi there,
very advanced hard- and software indeed! Very impressed!
I have a Truma Contol 4 Heater and Truma A/C operating with the Truma iNet Box and intend to switch the iNet Box for a custom so…