-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
LoPy-4 version V1.8.6 2019/05/15, rel 1.18.2.r7
issue on deepsleep: LoPy-4 does not wakes up spuriously from deepsleep. All 7 LoPy's with this setup show this problem.
Sometimes means after many d…
teusH updated
4 years ago
-
From https://forum.pycom.io/topic/2272/lopy-l01-lorawan-blocking-socket-send-hangs-permanently
Using firmware v1.10.2.b1 on LoPy L01 OEM module
Using the code shown below periodically the socket…
-
Hi,
I've managed to setup the advertisement as such now it functions as an iBeacon. However, I can't find anywhere in the documentation for a way to set the advertising frequency and the actual tra…
-
Hi,
We need an example code that works / with Lopy4 - The things Network for US frequency, we have several projects running with Pycom boards, there are too many flaws with these devices.
This c…
-
(sysname='LoPy', nodename='LoPy', release='1.7.9.b3', version='v1.8.6-747-gc4ec6110 on 2017-08-09', machine='LoPy with ESP32', lorawan='1.0.0')
I tried to Add the FSK Channel from LoRaWAN 868 MHz (…
-
Board LoPy-4, firmware V1.20
While in deepsleep the 5V current is 12 mA (brand new LoPy-4).
With firmware V1.18 the deepsleep current is 0.2 mA (OK).
We cannot use V1.18 as we found that deepsleep …
teusH updated
3 years ago