-
Hello Ropg,
Luckily I found your library. The Heltec libraries and instructions are terrible. I have a device on which I have installed the Lora example. After entering the TTN access data via the …
-
Hi,
I'm new using LoRa.
I got one LoRa mkrwan 1300 and i'm wondering if i can use it as a gateway just to read data from end devices.
Best regards,
Merlin Pineda
-
I updated the lorix one lorawan gateway for the things network and we can redeploy it on flughafen core.
We need a spare network port with 24V PoE and static or dynamic IP address. I can do the con…
booo updated
2 months ago
-
hi, this is my code,
`#define BAND 868E6
@de
//LORA
lora_spi.begin(SCK, MISO, MOSI, SS);
LoRa.setPins(SS, RST, DIO0);
LoRa.setSPI(lora_spi);
if (!LoRa.begin(BAND))
{
Serial.…
-
**Describe the problem you have/What new integration you would like**
Add support for LoRa WAN protocol like RFM95
**Please describe your use case for this integration and alternatives you've …
-
i want recieve the data sent from DRF1278F through Dorji LOra 434MHZ through USB on desktop with baud rate of 9600
-
Hello everyone,
I'm encountering an issue with my LoRa setup in the Australia region. Here's my setup:
Device: ESP32 with SX1262 Waveshare module
Gateway: Raspberry Pi 4 with SX1303 915MHz, usi…
-
Hi... There
Hope you all are doing well
For the past few days, I'm dealing with the **LoRaWAN Firmware having class-C**
In my application, I need the continuous connection between Node to gat…
-
I have problem with any example from LoRa.h.
My Code:
```
#include // include libraries
#include
#define LoRa_SCK 14
#define LoRa_MISO 12
#define LoRa_MOSI 13
#define …
-
Hi,
Thank you so much for the script. Executing `./lora_gateway_pi2` worked very well using Raspberry Pi 3B+ and LoRa GPS Hat as gateway. However, the gateway I used was single channel gateway. Now…