-
`SA1` `BLULAKE1` currently `0.657` feels low
-
Currently the milling operation occurs at the end of each layer. This increases printing time with more tool changes and does not allow the tool to get a large enough chip load to clear properly. It w…
-
Pleasantly surprised to see the milling option!
I use a CNC router and wondered if it is possible to generate only the milling G-code.
As a next step i wonder if it would be possible in future t…
-
I'm unable to find any instruction on how to do milling with your script. I found this in an old forum post :
> click 'make path from shape' button in Path workbench to convert to gcode
But thi…
-
With the fabecole project, the hardware assembled became complexe and needed to be robust, therefore the need of a PCB.
Several solution are possible, order it in China, you get a good quality produc…
-
I John, here I show you what I have done using 3 bits: 0.10 - 0.7 - 3.0 and here I have implemented:
I have run pcb gcode 3 times, changing the dimension of the tool to 0.10, 0.8 (0.7 + 0.1) and 3.0.…
-
when we wait for the firmware to work the display together with the CNC milling machine)))?
-
Hello, is any chance have WEB UI for classic milling machine, not laser? I have changed firmware for CNC but WEB UI is still for laser engraver. Thank for response :)
-
Milling 3 recipe: Sunflower Oil - 2 sunflower seeds to produce 1 cereal germ
* Balance note: right now I'm getting 3-4 sunflower per plant at gathering 5, compared to 5 corn / wheat - adjust to 3 s…
-
- Redwood Squad /Balance
With changes to power and with the reasoning that we don't want to restrict housing to rivers/place for windmills i would like to see the Mill object be changed into an indus…