-
Since I don't know if it is Robin Nano 1.2 firmware issue or a MKS WIFI module I leave here the link to the issue I report on the MKS WIFI git:
https://github.com/makerbase-mks/MKS-WIFI/issues/19
-
I am using the MKS TFT32 + WiFi module, Cura 4.4 + MKS wifi plugin. https://github.com/makerbase-mks/mks-wifi-plugin. Deleting files on the SD card does not work.
-
Hi apollo80,
thank you for your great work.
I was able to flash your code but very often (10 minutes for example) during a print and even while not printing I get a "MCU shutdown. Timer too close"…
-
Hi,
I got a robin nano v2 with ts35 monitor and mkswifi
Now thanks to Luca I got esp3d fw installed and so fare working with webui.
The problem is, that most of the Gcode I send via wifiterm…
-
Hello, I bought MKS Gen L v1.0 with TFT24 and wifi module MKS TFT-WIFI ESP8266. I downloaded latest V3.0.3 firmware and plugin 3.5 for Cura 3.6. Printer is connected properly by wifi module. I can set…
-
On the readmewhat means "the interface needs to be transferred to the AUX-1."
```
Compatibility with esp3d ?
Esp3d is a well known wifi project in 3d printing , too. If you are using MKS Robin …
-
Hi,
i have flashed ESP3D to my MKS WIFI
(Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)
NANO V3 / TS35
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3
#define …
-
hi,
here is the list of bugs that I found in first 24 hours with this motherboard :
1)
only one LED red alarm works, the others are apparently not managed... or the documentation is not up to d…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
MKS_UI: Y axis movement loss / offset, does not occur with Marlin color UI
### Bug Timeline…
phcay updated
2 months ago
-
The thumbnail generator has a fault in the logic.
After setting in SuperSlicer:
![image](https://user-images.githubusercontent.com/26493496/198406064-b8337a13-e2d1-4f55-a766-32c654989a80.png)
I…