-
I was playing around with W0CHP's PiStar Dashboard, and on updates he brings down the Nextion Driver which wipes out my Nextion Display from the Linux host, /dev/ttyUSB0 goes away. And then it can't f…
-
Created a bridge from FCS room through YSFGateway to a TGIF DMR talk group, bridging via DVSwitch software. Does work although I receive a "Network watchdog has expired" error message after each tran…
-
Hi,
It appears that the service stops working when the internet connection is unstable or changes its IP address. MMDVMHost still works, DV operation is not affected, but DAPNET connection breaks. …
-
Hi,
the solution to this issue is shown at the bottom of this post.
I‘m running MMDVMHost host on a Linux system. It is a server system, AMD Ryzen, 8 code 8 GB RAM, M.2 SDD, …
My STM32F103 …
-
I have a MMDVM_HS_DUAL with 12,880 MHz. With FW 1.5.2 all worked, if I compile the newest 1.6.0 MMDVMHost says NAK from modem. MMDVMCal also not working. Flashing backward to 1.5.2 bring all back, the…
-
I have successfully compiled ircddbgateway on my Raspberry pi 3 running Raspian jessie. It also installs and runs.
When I connect to an xrf with DExtra, it connects, but when I key the mic, ircddbg…
-
MMDVMHost does not establish a new connection after losing the connection to a dmr-master (ipsc2).
[DMR Network]
Type=Direct
Log shows:
E: 2021-03-05 13:19:37.225 DMR, Master is closing down…
-
--- Is it safe to the MMDVMHost to just delete the DMRIDs.dat file to stop the translation of the DMR ID numbers to Callsigns? Or is there a better way, like a software switch?
--- We have already re…
ghost updated
3 years ago
-
Hello,
we'd like to support MMDVMHost from server-side (replacing brandmeister or HBLink with custom solution)
However reading this docs: https://wiki.brandmeister.network/index.php/Homebrew_rep…
-
I'm trying to support IPv6 at my branch https://github.com/jg1uaa/MMDVMHost/tree/ipv6 .
I checked IPv6-cabable xlxd/DMR and DAPNETGateway, it looks working.
Currently the code has workaround like …