-
Sorry that i'm missusing an Issued to ask a question!
I've been trying to get wireguard running over via sim800/sim7000 GSM/LTE Modems and to run mqtt (not via http bit via native protocol) over th…
-
I am trying to get SoapySDRserver working with GQRX but all I ever got was a constant waterfall. Frequency changing did not change anything. After that I ran cariboulite_test_app and got:
`09-04 22…
-
Dear All,
currently the modem_context / modem_pin depend on aggregating the modem's pins in an array. ATM the vint pin is optional (and macro-checked for existence). I need to add a second optional…
-
**Expected Behavior**
The Fibocom FM350-GL modem should be recognized and function correctly with the OpenMPTCProuter on my Raspberry Pi 4B, similar to its performance with OpenWRT.
**Current Beha…
-
**TLDR:** Ender modems are OP.
CC 1.6 introduced the `repeat` program, which allows rednet to relay messages between computers. The intent here was to allow more long-distance wireless communicatio…
-
Phase Modulation, convert SNR to N-PSK, then to number of bits
Digital domain error correction (fix 1 bit)
-
I have IOT2050 Basics FS:04 and 4G modem Huawei ME909s-821 .
Everything is running with Example Image V1.3.1.
The operation is correct. But after a few days working correctly on some devices, no…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [X] I have used th…
-
Hello,
I'm trying to set up a project with a simcom sim868 GSM/GNSS module using PPP. I managed to setup the module using PPP on linux successfully using the following [guide](https://andino.systems/…