-
As someone using Galils in IBEX I would like to be able to home more than one axis at a time without errors and with it ending reliably in order to save time when homing axes on an instrument.
### Ac…
-
When homing specific axes, which have their max rate set lower than the locate/seek homing rate, the TCOOLTHRS is set according to the locate/seek homing rate. This leads to TCOOLTHRS being too low to…
-
The table of motors perspective is quite slow and relies of Java dev…
-
On IMAT, after homing some of the axes repeatedly home. This case in question is from IMAT GALIL_01. Relates to Axis MTR0107. Timestamp 13:5 17/09/2018 roughly
Microsoft Windows [Version 6.1.7601]
…
-
Hey everyone,
Quick question. In fake_motor_record.py there is the following hook for when a value is written, which I can use to kick off an actual motor movement:
```python
async def valu…
-
Hi All,
I have read through multiple threads but it seems that I'm reporting something new/unseen so far.
My Setup is Eleksmaker Mana SE v3.2 + grbl1.1g, I have upgraded X - Stepper Driver, and …
-
This isn't the first time, but usually it's fine and i never see it. But i swapped to use Z-Max, i was using probe as Z-Min but it's problematic and un-ideal. Using the Latest DEV, and home …
-
Hi there, Ive tried with mutliple different branches of the project to no avail.
I am using a Ardiuno Mega 2560, with a Ramps 1.4.
`from printrun.printcore import printcore
from printrun import g…
-
Hello,
I built a new Trident from an LDO kit, and I was running into an issue migrating to Klicky.
When I comment out the `safe_z_home` section in the LDO-provided config and migrate to Klicky, …
-
I've made changes to Klipper on my SKR Pico according to instructions herein and checked the wiring and the probe deploys and stows but never shows as triggered. The probe deploys using the Probe_Delp…